Faculty Publications

Faculty Publication Academic year 2023-24:

• Dr. Deulgaonkar V.R., Failure Analysis of Industrial Screw Conveyors, Journal of Failure Analysis and Prevention, 06/203.https://doi.org/10.1007/s11668-023-01719-3

• Dr. Swapnil Lahane, Evaluation and ranking of solutions to overcome the barriers of Industry 4.0 enabled sustainable food supply chain adoption, Journal of Cleaner Logistics and Supply Chain, Volume 8, September 2023, 100116,July 2023, https://doi.org/10.1016/j.clscn.2023.100116

Faculty Publication Academic year 2022-23:

• Dr. Deulgaonkar V.R. and Prof.M.P.Rode, Failure Analysis of Leaf spring Used in Transport Utility Vehicles, Journal of Failure Analysis and Prevention Vehicles, 18/09/ 2022. https://doi.org/10.1007/s11668-0220-01470-1

• Dr. Deulgaonkar V.R. Shaunak Deshpande ,Finite Element Analysis of Foldable Electric Vehicle , Int. J. Vehicle Structures & Systems , Volume & Issue number- 14(6), 697-702, 12/1/2022 ISSN/ISBN Number- 0975-3060

• Dr. Patil K.R., A.K. Raul , Aniket Anbhule , Madhura Barve , Ajay Bedare and Yogesh Magare, Performance Evaluation of BTMS for Electric Vehicles using Heat Sink - A Numerical Study, Int. J. Vehicle Structures & Systems, 14(2), 395-400. doi: 10.4273/ijvss.14.3.24 (SCOPUS, Source Record Id - 21100197978).2022

• Dr. Patil K.R., I.N. Nagarkar, N.C. Kulkarni and S.S. Khadke, Design and Analysis of Artillery Rocket Launcher Tube Mounted on Truck, Int. J. Vehicle Structures & Systems, 14(2), 395-400. doi: 10.4273/ijvss.14.3.24 (SCOPUS, Source Record Id - 21100197978).

• Dr.K.R. Patil, Smita K. Patil, Harshal Kulkarni, Shivani Deshmukh and Shridhar Myakal, Effect of Nozzle Design on the Stability and Performance of Self-Rotating Centrifugal Oil Filter, Int. J. Vehicle Structures & Systems, Int. J. Vehicle Structures & Systems, 14(4), 465-471, 2022

• Dr. K.R. Patil, Smita K. Patil, Harshal Kulkarni, Shivani Deshmukh and Shridhar Myakal, Intelligent Self-levelling Platform for Missile Articulation, Int. J. Vehicle Structures & Systems, 14(4), 477-480,2022

• Dr. K. R. Patil, Effect of Injection Timing and Oxygenate Concentration on Performance and Emission Characteristics of DEE-Ethanol-KOME Biodiesel Fuelled CI Engine, Int. J. Vehicle Structures & Systems, 14(4), 512-517

• Dr. K. R. Patil, Performance Testing of Multicylinder Compressed Ignition Engine with Dual Fuel Mode of CNG with Biodiesel and Diesel, Int. J. Vehicle Structures & Systems, 14(6), 703-710, Aug,2022

• Dr. P. K.Tamkhade, Ruchika D.Lande, Raviraj B.Gurav, Mandar M.Leleb, Investigations on tube in tube metal foam heat exchanger, Elsevier Material Today Prooceedings, volume 72, Part 3, 2023, Pages 951-957, 21/09/ 22

• Dr.V. W.Bhatkar, Anirban Sur and Anindita Roy, Effect of term of error on wet- bulb temperature measurement using aspiration psychrometer, Frontiers in Heat and Mass Transfer, 19,3 (2022)

• Dr.V. W.Bhatkar, Anirban Sur and Anindita Roy, Exergy analysis of a refrigeration system with a minnichannel condensor using R134A refrigerant, Frontiers in Heat and Mass Transfer, 19,15 (2022)

• Dr. V. W. Bhatkar, Analytical study of heat and mass transfer in air washer, JP Journal of Heat and Mass Transfer, Volume 29, 2022, Pages 179-188, Oct,2022

• Mr. Vivekanand Naikwadi, Fatigue analysis of alloy wheel using cornering fatigue test and its weight optimization, Elsevier Material Today Prooceedings, Volume 62, Part 3, 2022, Pages 1470-1474, 2022

• Dr. P. K. Tamkhade, Computational and analytical study on CPU heat sink cooling by single and double stack air-foil micro pin fins, Elsevier Material Today Prooceedings, 16 /03/2023

• Dr. V. W. Bhatkar, Performance of an Adsorption Chiller Using Diesel Truck Exhaust: Effect of Operating Parameters, Advances in Materials and Processing Technologies, Taylor and Francis, 3/9/2023

  .

Faculty Publication Academic year 2021-22: (Web of Science/ SCOPUS)

• Dr. Deulgaonkar V.R., Failure analysis of Taper-Lock bush used in aggregate batcher plant for construction applications, Engineering Failure Analysis, volume 130, Dec 2021,https://doi.org/10.1016/j.engfailanal. 2021.105753
• Dr. Deulgaonkar V.R., Design and Analysis of Foldable Vehicle using Finite Element Simulation,International Journal of vehicle structures and systems, doi:10.4273/ijvss.13.3.25,https:/www.proquest.com/openview/4fa6c7f8400f02c95db2c5 462417a305/1?pq-origsite=gscholar&cbl=60382. 
• Dr. K. R. Patil, Design and Analysis of Control Strategy for an Efficient Battery Thermal Management System of an Electric Vehicle, International Journal of Vehicle Structures & Systems, Vol. 14, Iss. 2, (2022): 144-149. DOI:10.4273/ijvss.14.2.03 https://www.proquest.com/openview/5db66e57b595736d263b3d5683f07834/1?pq-origsite=gscholar&cbl=60382
  
• Dr. Bhatkar V. W., Dynamic simulation of refrigeration system using Dymola behavior modeling. Journal of Heat and Mass Transfer, Vol. 25, pp. 99–107, 2022 (Scopus). http://dx.doi.org/10.17654/0973576322006
• Dr. Bhatkar V. W., Experimental study of multistage indirect evaporative coolers, Journal of Heat and Mass Transfer, Vol. 24, No.1, pp. 69–77, 2021(Scopus). http://dx.doi.org/10.17654/HM024010069
• Dr. Bhatkar V.W., A. Sur, An experimental analysis of liquid air jet pump, Frontiers in Heat and Mass Transfer, Vol. 17, No.12, 2021, pp. 1-5, Web of Science, Scopus). DOI: 10.5098/hmt.17.12
• Dr. Bhatkar V.W., Thermal simulation of a liquid-air jet pump, Journal of Heat and Mass Transfer, Vol. 23, N0. 2, pp. 225 – 233, July 2021 (Scopus). http://dx.doi.org/10.17654/HM023020225
• Yadav R. S. 'Design and Analysis of Electric Bike' in International Journal of Advanced Research in Science, Communication and Technology (IJARSCT) Volume 9 Issue 1 Page 165-171
• Yadav R. S. Prasanna Rajendra Kadam 'STRUCTURAL BEHAVIOR OF FILLET WELD JOINT FOR BIMETALLIC CURVED PLATE USING FINITE ELEMENT ANALYSIS (FEA)' 6th International Conference on Advanced Research in Arts, Science, Engineering & Technology, Organized By DK International Research Foundation, Perambalur, Tamil NaduICARASET - 2021 Proceedings / ISBN Number: 978-93-90956-53-1 Page no. 23-28

Faculty Publication Academic year 2020-21:

• Dr.Vikas Radhakrishna Deulgaonkar, Ketan Joshi, Prasad Jawale, Sakshi Bhutada and Sherly     Fernandes. (2021). Failure     “Analysis of Timing Device Piston and Supply Pump Vanes in Fuel     Injection System for Transport Utility Vehicles”, Journal     of Failure Analysis and Prevention,     https://doi.org/10.1007/s11668-020-01052-z     (Springer Publications)
• Dr.Vikas Radhakrishna Deulgaonkar, Nupoor Ingolikar, Atharva Borkar, Sagar     Ghute and Neha Awate. (2021).     “Failure     analysis of diesel engine piston in transport utility vehicles,     Engineering     Failure Analysis”,     https://doi.org/10.1016/j.engfailanal.2020.105008     (Elsevier Journal)
• Dr. V. W. Bhatkar, published paper titled “Comparison of theoretical and actual water loss for adiabatic cooling of fin fan water cooler” in Elsevier Materials Today: Proceedings, April 2021
• Dr. V. W. Bhatkar, published a paper titled “Design of vertical fire tube boiler using IBR code and FEA analysis” in Inderscience, International Journal of Nanotechnology, April 2021.
• Tamkhade P.K “Estimation     of Heat Transfer Coefficient for Intermediate Fluid Stream in Triple Concentric Tube Heat Exchanger" ,Published in International Journal of Ambient Energy', Talor & Francis Journal , which is ESCI,     Scopus and UGC care listed.
• Deulgaonkar V. R “Design and drag analysis of Fixed Wing Unmanned Aerial Vehicle for High Lift", Publication 10/8/2020(SCOPUS)
• Tamkhade P.K “"Estimation of Heat Transfer Coefficient for Intermediate Fluid Stream in Triple Concentric Tube Heat Exchanger" ", Published in International Journal of Ambient Energy', Talor & Francis Journal , which is ESCI, Scopus and UGC care listed.
• Khot Rahul S, T. Venkateshwara Rao, Harshad Natu, H.N. Girish, Tadashi Ishigaki, Puttaswamy Madhusudan (2021) “An Investigation on Laser Welding Parameters on the Strength of TRIP Steel Strojniški vestnik” - Journal of Mechanical Engineering 67(2021)1-2, 45-52
• Khot Rahul S, T. Venkateshwara Rao, H.N. Girish, Tadashi Ishigaki, Puttaswamy Madhusudan (2021) “Preiskava vpliva parametrov laserskega varjenja na trdnost jekel TRIP Strojniški vestnik” - Journal of Mechanical Engineering 67(2021)1-2, SI 7.
• Khot Rahul, S., Rao, T.V., Keskar, A., Girish, H.N., Madhusudan, P. (2020), “Investigation on the effect of power and velocity of laser beam welding on the butt weld joint on TRIP steel”, Journal of Laser Application, vol. 32, no. 1, art. ID 012016, DOI:10.2351/1.5133158
• Khot Rahul, S., Venkateswara Rao, T. (2020), “Effect of quenching media on laser butt welded joint on transformed induced plasticity (TRIP) steel”, International Journal of Advanced Trends in Computer Science and Engineering, vol. 9, no. 5, p. 7544-7549, DOI:10.30534/ijatcse/2020/90952020
• Khot Rahul, S., Venkateswara Rao, T. (2020), “Investigation of mechanical behaviour of laser welded butt joint of transformed induced plasticity (TRIP) steel with effect laser incident angle”, International Journal of Engineering Research and Technology, vol. 13, no. 11, p. 3398-3403, DOI:10.37624/ IJERT/13.11.2020.3398-3403.
• Khot Rahul S, Venkateswara Rao T., Girish H. N.,Madhusudan, P. (2020), “Parameter Forecasting of Laser Welding on Strength, Deformation and Failure Load of Transformed Induced Plasticity (TRIP) Steel using Experimental and Machine Learning Approach”, Journal of Seybold Report Volume 15 Issue 8 Page No. 2148 - 2157

Faculty Publication Academic year 2019-20:

• Purandare Pramod S. , Pradip K Tamkhade ,Lele Mandar M., Gupta Raj K., “Thermal Analysis and Performance Evaluation of triple Concentric Tube Heat Exchanger.", in International journal of engineering and advanced Technology (IJEAT) ISSN:2249-8958,Vol,-X,Issue -X Published: 2019 (SCOPUS)
• R. J. Yadav - “Experimental study on direct, indirect and open air drying of Kiwifruits using a hybrid cabinet type solar dryer”  (IJEAT) ISSN: 2249 – 8958, Volume-X, Issue-X .Published 2019

• R. J. Yadav. ,Kore S.S., Raibhole V.N., “Effect of Dimpled Surface with straight Spoiler Turbulators on Heat Transfer and Fluid Flow Characteristics for Channel”, ISSN:2278-3075,Volume-8 Issue-12, Published oct.2019  (SCOPUS)
• Deulgaonkar V. R.. , Kulthe R., Mekhe V., More M., Nandwadekar S., “Finite Element Analysis of Centre Pin and Bracket of Jig – Fixture Assembly”, International Journal of Mechanical and Production Engineering Research and Development, Volume:9, pp. 643-648, Published: Aug 2019  (SCOPUS)

• Deulgaonkar V. R.. , “Failure analysis of Fuel pumps used for diesel engines in Transport Utility vehicles”,DOI-21/07/2019,1350-6307@Elsevier Ltd.  (Web of Science)

• Deulgaonkar V. R.. , “Analysis of Vibration Characteristics of Transport Utility Vehicle by Finite Element Method” International Journal of Vehicle Structure & System, Volume: 11, 2019  (SCOPUS)

• Deulgaonkar V. R.. ,“Finite Element Analysis of Chassis Integrated Structure for Tractor Trolley in Agricultural Applications” International Journal of Vehicle Structure & System, Volume: 11, 2019 (SCOPUS)
• Pradip K Tamkhade . , Purandare P.S., Pradip K Tamkhade ,LeleMandar M., Gupta Raj K., “Thermal Analysis and Performance Evaluation of triple Concentric Tube Heat Exchanger.", in International journal of engineering and advanced Technology (IJEAT) ISSN:2249-8958,Vol,-X,Issue -X Published: 2019(SCOPUS)
• A.B Gholap. ,M.D. Jaybhaye, “Decision Making of Condition Monitiring using AHP and TOPSIS Method” ISSN:2249-8958,Volume-8 issue-6, Publication date August 2019(SCOPUS)

Faculty Publication Academic year 2018-19:

• Patil K. R. ,“Effect of Oxygenated DEE Additive to Ethanol and Diesel Blend in the context of Performances and Emissions Characteristics of CI Engine” International Journal of Applied Engineering Research, Volume: 13, pp. 9493-9499, Published 2018 (SCOPUS)
• Deulgaonkar V. R. , “Design and analysis of state Transport (S.T.) Utility Vehicle-Bus.ISSN:0975-3060,0975-3540,DOI-10.4273/ijvss.11.2.0.Publication 2019 (SCOPUS)
• Deulgaonkar V. R. ,“Finite Element Analysis and Experimental Simulation of Chassis Mounted Platform for Off-Road Wheeled Combat and Transport Utility Vehicles” International Journal of Vehicle Structure & System, Volume: 10, 2018 (SCOPUS)

Faculty Publication Academic year 2017-18:

• R. J. Yadav. ,Kore S.S., Joshi P.S., “Correlations for heat transfer coefficient and friction factor for turbulent flow of air through square and hexagonal ducts with twisted tape insert”, Heat and Mass Transfer, Publishe:2017 (SCI Index)

• R. J. Yadav. ,Kore S.S., Raibhole V.N., “Analytical Prediction of Heat Transfer in Tape generated Swirl Fow”, Proceedings of the ASME 2017 International Mechanical Engineering Congress and Exposition, Published 2017 (SCOPUS)

• Deulgaonkar V. R.. , Prabhu R.R., “Finite Element Analysis and Experimental Validation of Residual Stress Analysis in T-Welded Zone ofAluminium Alloy 6061-T6”, International Journal of Mechanical and Production Engineering Research and Development, Volume:8, pp. 1169-1176, Published: Aug 2018  (SCOPUS)

• Deulgaonkar V. R.. , Vibration Measurement and Spectral Analysis of Chassis Frame Mounted Structure for Off-road Wheeled Heavy Vehicles. International Journal of Vehicle Structures and Systems 8(2). 23-27. http://dx.doi.org/10.4273/ijvss.8.1.05.  (SCOPUS)
• Deulgaonkar V. R.,”Gradient Load Evaluation of Chassis Frame Mounted Specialized Structure Designed for Heavy Off-road Vehicles”. International Journal of Vehicle Structures and Systems 8(2). 86-90.  (SCOPUS)